Welcome to Nordon Gasket & Packing High Quality Gasket Materials, Seals &
Gaskets for Automobile and Industrial Applications
    Home     |     About us   |     Products      |     Online Inquiry     |     Contact us      |     Site Map
Spiral wound gasket
Ring Joint Gaskets
Non Metallic Gaskets
Gland Packing & Compression Packing
Graphite Sheet Gaskets
Non Asbestos Sheet,Compressed Jointing
Non Asbestos Sheet,Beater Jointing
Asbestos Sheet Compressed Jointing
PTFE & Expanded PTFE
Cylinder Head Gasket Sheet
Rubber Sheet & Roll
Ceramic Fiber and Fibergalss

Nordon Gasket & Packing Co.,LTD.
Address : No.227,Yuping Road,Taohua Industry Park,Hefei 230601,China.
TEL :86-551-63825311
FAX :86-551-63825312
E-mail : info@gasket-material.com
Skype: gasketmaterial
NGP-SP502 PTFE Rod, Tube
There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mmand the other Is made by ram extruding method is the diameter from 10to 50mm;rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age.
PTFE has a wide range of practicable temperature from-180+260and a wax-like surface to which anything hardly sticks.
PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics.

Apparent density:2.30g/cm3
Tensile strength (min):14.0MPa
Ultimate elongation (min):%140

Applications:Electrical Insulation,seal,Antisticking materials.


 
 
 
Copyright (c) gasket-material.com All Rights Reserved.